Kwiktech Tube Joiners Header

Kwiktech Tube Joiners

Big News!

We're excited to announce a new range of joiners, made by Kwiktech. They're versatile, strong and set to make your life easier in many situations where you need to build with rectangular and square hollow section. Check out the videos at the bottom of this page to see how they work!
Available to buy now through our online store.

The Components...

Kwiktech Universal Connector

Universal Connector

This is the basic building block and can be fitted onto RHS sizes from 50mm up. A 16mm Tek Screw (either hex or pan head) will work on thicknesses up to 2.0mm.

Kwiktech Std Rail Connector

Standard Rail Connector

The rail connector is fixed to the universal connector using a cap-head screw. This standard connector is fitted to a 38 x 25mm rail (using a 16mm tek screws as above) and can be adjusted to one of several possible angles ranging from 0 - 45 degrees.

60deg Rail Connector

60 degree Rail Connector

As with the standard rail connector above, this connector is fitted to the universal connector using a cap-head screw. This rail connector is attached to a 38 x 25mm rail (using a 16mm tek screws as above) and can be fixed at 60 degrees.

Socket Head Cap Screw ZP M6 x 40mm

Cap Screw

The zinc-plated M6 x 40mm Cap Head screw is used to attached the rail connectors to the universal connector.

Intro to the Kwiktech system

Quicker than welding!

Kwiktech Universal Connector

DIY Gate Frame